Back to Top
Skip to Site Search Skip to Utility Nav Skip to Top Nav Skip to Left Nav Skip to Content
Close Main Menu

Making a Research Poster

Information from:

Tips for Design and Formatting:

Shorten your text lines

Long lines of text are more difficult to read, which is why magazines and newspapers always break up their text into narrower columns. If your poster has a landscape orientation, consider breaking your text into four columns.

Justify the right way: to the left

While justifying text on both the right and left (i.e., full justification) makes for very neat-looking columns, designers are beginning to move away from the practice, says Nichole Jonas, a graphics specialist at the Eunice Kennedy Shriver National Institute of Child Health and Human Development. It can cause distracting vertical “rivers” of spaces down the page. Left justifying text makes for an easier read.

Consider your font

You don’t have to stick with just one. Adding a little variety, and even downloading a font that isn’t available on PowerPoint, can make your poster stand out. But never use more than two or three fonts, says Jonas. She suggests using sans serif fonts like Helvetica or Gill Sans for the body and a serif for the titles. (Other designers prefer serif fonts for the body, as they “can help guide the eye through the word,” said Jonas.) “Anything but Comic Sans,” she says, as it tends to looks amateurish.

Don’t put conclusions on the floor

Even though it’s the most important part of the poster, the conclusion is often placed “at the bottom, [where] it’s at people’s feet,” says Graves. She suggests placing it at top of the rightmost column—or, if you feel daring, start the body of the poster with it.

Bigger is better

“People have this weird love of small font,” says Purrington. “They think it looks professional and that large fonts are for children.” But that’s not the case, he says. In low light conditions, or when scientists are reading over other people’s shoulders, larger fonts are essential. LiLynn Graves, graphic and web designer at the Cornell Center for Materials Research at Cornell University, suggests a font size of 85pt for the title, 36–44 for the headers, and 24–34 for the body text.

Dump PowerPoint’s color palette

Many people use PowerPoint to create their poster, but the program was designed for projecting images in a darkened room. The deep blues and fluorescent greens that look good in that setting often produce posters that are too dark and difficult to read, says Graves. Stay away from primary colors on primary colors (no reds on blues, or reds on yellows). Instead, Jonas suggests a background in a muted color—one that is closer to white on the color spectrum—for a more professional tone.


Check for readability at 6 feet; print out a small copy to better judge your layout choices; use a ruler to make sure all columns are aligned; stick with black as the text color.

How to make your data easy on the eyes:

Title with a message

Titles are the best way to quickly tell readers what they are supposed to take away from your data. Always title your graphs, says Purrington.

Make your findings obvious

Highlight the peak, trough, or other comparison of interest with an arrow containing the value of that data point. It’s better than making a reader work out the value from the axes.

Include the method

While many posters do include a methods section, it is almost always useful to include a simple description of how you got the data you’re presenting near the graph, says biochemist Joseph Provost of Minnesota State University Moorhead, a frequent judge of student posters. Without a simple caption that describes the experimental method, “it’s hard to understand how an experiment was done,” he says.

Temporarily dump your text

A good way to test to see whether your graphics are serving their intended purpose: “If you removed all the info besides the graphics, the poster should still be pretty good,” says Purrington. “Scientists are lazy, they don’t read,” says marine biologist Nando Boero, from the Università del Salento in Lecce, Italy. The graphs should tell the whole story, he says.

Banish the legend

Legends or keys to multicolored line graphs give a viewer one more thing to interpret. If possible, annotate your data with labels directly on the image, says Purrington.


Use graphs rather than tables; avoid cluttered figures; arrange experiments to tell a story, not in the order they were performed; include enough data to defend your hypothesis; keep about a 50/50 ratio of graphics to text.

Tips for Clearer Content:

How to write a title

Bad: “Mural architecture of planula larvae of a cniderian might be suggestive of the central nervous system”

Good: “The first brain”

Rationale: A poster is more of an advertisement for your work than a definitive account, says Boero. There are some things you can’t get away with when you’re writing a paper. But you can be on the cheeky side of accurate in posters to capture the attention of a busy passerby.

Bad: “The MES mess, a good buffer gone bad”

Good: “How a common cell culture pH buffer interferes with transport assays”

Rationale: It’s best to avoid acronyms and jargon when aiming for a general audience. Scientists tend to wander through poster sessions. If you can nab a researcher from another field, you may have won a future collaborator, or someone who will offer a new perspective on your work, says Mark Wallert, a researcher at Minnesota State University Moorhead and frequent poster judge.

Sundries: Never use ALL CAPS in titles; emphasize titles in one way: boldface, italics, or underline, but never all three.

Improve your body

Unlike journal articles, where tables and graphs are often located at a distance from their description in the text, “in a poster, the words must be near the visual aid,” says Boero. “You have that possibility, so use it.”

Cut your text

Once you’ve created your content, read it again to see how many words you can cut, says Boero. Pretend you’re writing a telegram, and paying for every word, he suggests.

Make killer bullets

Limit bulleted lists to the conclusion section, if possible. There, lay out 4–5 summary statements that capture what your data means and its wider implications.

Answer your hypothesis

Make sure your conclusion is more than a restatement of your results. It should directly address the hypothesis you lay out in the intro or abstract.


The Checklist: What to do before you print

Give it a test run

In his experience, Wallert says, “you find [mistakes] when you’re standing in front of your poster” at the conference. To save yourself the embarrassment, project your poster on the wall of your lab and run through your presentation, he suggests.

Check your file size

Make sure you haven’t inserted a 500 MB image, or one that’s low resolution. “If a person has never done a poster, they’ll probably make one of those mistakes,” says Purrington

Are your axes labeled?

Oddly enough, missing axis labels are something that poster judges Wallert and Provost see often.

Check your message

Once you’ve made your poster look its best, give it one more read-through to make sure that it presents the point of your research in the most convincing light.

Color check

Make sure the colors you’ve chosen are readable in low light. It’s hard to predict where your poster will be placed, so make sure your choices work in different settings.

Check dimensions

Although this should really be the first thing you do, not the last, it’s a good idea to make sure your poster conforms to the meeting’s size and orientation specifications.

UNG follows Section 508 Standards and WCAG 2.0 for web accessibility. If you require the content on this web page in another format, please contact the ADA Coordinator.

Back to Top